FORKLIFT OPERATIONS TRAINING AND CERTIFICATION COURSE (NATIONAL)
Course Overview
This course is for operators and supervisors of forklift operations. The course uses OSHA criteria from 29 CFR 1910.178.
Course instructors highlight the most common dangers of powered industrial truck operations and provide solutions to those dangers.
Driving tips, avoiding injury and proper handling & transportation of loads are featured. To be in compliance with OSHA 29 CFR 1910.178, only trained and authorized operators shall be permitted to operate a Forklift.
Participants receive manuals & hands-on practical exercise to facilitate training.
Course Objective:
Upon completion of this course participant should be able to:
- Carry out pre-use inspection of forklifts in compliance with manufacturers’ specifications and industry best practice.
- Demonstrate skills for proper fueling and battery charging techniques
- Identify types and characteristics of forklifts with different kinds of hazards associated with each one.
- Identify stability triangles for forklifts.
- Show confidence on knowledge gained applicable to Basic Driving Principles, Stability, and Load Handling.
Learning Outcomes:
- Define what forklift equipment is and its purpose
- Explain the Hazards and Risks when operating a Counterbalance lift truck by stating the causes of instability
- Demonstrate an understanding of Rated Capacity Plates
- Identify components and controls and state their function
- Demonstrate the Pre-Use checks and inspections required before using the machine
- Describe the standards and procedures for forklift truck operations
- Demonstrate safe and effective use of a Counterbalance lift truck correctly in accordance with accepted good working practices.
Course Outline:
- Types of Forklifts
- Parts of the forklift
- Forklift Safety Features
- Forklift Hydraulic system
- Stability (Principle of Lifting Load)
- Refueling and Recharging
- Parking / Leaving a Forklift Unattended
- Forklift Pre-Use Inspection
- Operator’s Responsibilities
- Operating Procedures
Training Fee (Fresher): N300,000 (Three Hundred Thousand Naira).
Training Fee (Refresher): N200,000 (Two Hundred Thousand Naira).
Duration of Training:
- Fresher/Novice – 5 days
- Refresher/Experienced – 3 days
Mode of Training: Instructor Led Classroom & Practical
Days of Training: Mondays – Fridays
Time of Training: 9 am – 4 pm
Training Venue: At company’s Office
For Enquiries Call or WhatsApp: +2348037236096, 09071902891
Email: info@zotaoilandgas.com
Payment details: ZOTA OIL GAS NIGERIA LTD, Guaranty Trust Bank (GTB) – 0014215004
Feel free to ask your questions in the comments section. We will answer as soon as possible. Thank you.
FORKLIFT OPERATIONS TRAINING AND CERTIFICATION COURSE (INTERNATIONAL)
Course Overview
This course is for operators and supervisors of forklift operations. The course uses OSHA criteria from 29 CFR 1910.178.
Course instructors highlight the most common dangers of powered industrial truck operations and provide solutions to those dangers.
Driving tips, avoiding injury and proper handling & transportation of loads are featured. To be in compliance with OSHA 29 CFR 1910.178, only trained and authorized operators shall be permitted to operate a Forklift.
Participants receive manuals & hands-on practical exercise to facilitate training.
Course Objective:
Upon completion of this course participant should be able to:
- Carry out pre-use inspection of forklifts in compliance with manufacturers’ specifications and industry best practice.
- Demonstrate skills for proper fueling and battery charging techniques
- Identify types and characteristics of forklifts with different kinds of hazards associated with each one.
- Identify stability triangles for forklifts.
- Show confidence on knowledge gained applicable to Basic Driving Principles, Stability, and Load Handling.
Learning Outcomes:
- Define what forklift equipment is and its purpose
- Explain the Hazards and Risks when operating a Counterbalance lift truck by stating the causes of instability
- Demonstrate an understanding of Rated Capacity Plates
- Identify components and controls and state their function
- Demonstrate the Pre-Use checks and inspections required before using the machine
- Describe the standards and procedures for forklift truck operations
- Demonstrate safe and effective use of a Counterbalance lift truck correctly in accordance with accepted good working practices.
Course Outline include but not limited to:
- Types of Forklifts
- Operator’s Responsibilities
- Parts of the forklift
- Hydraulic system
- Stability
- Operating Procedures
- Refueling and Recharging
- Parking
- Selection of Forklift Operators
Training Fee: N300,000 (Three Hundred Thousand Naira).
Duration of Training:
- Fresher/Novice – 5 days
- Refresher/Experienced – 3 days
Mode of Training: Instructor Led Classroom & Practical
Days of Training: Mondays – Fridays
Time of Training: 9 am – 4 pm
Training Venue: At company’s Office
For Enquiries Call or WhatsApp: +2348037236096, 09071902891
Email: info@zotaoilandgas.com
Payment details: ZOTA OIL GAS NIGERIA LTD, Guaranty Trust Bank (GTB) – 0014215004
Forklift Operation Training
ZOTA Oil and Gas Nigeria Limited offers two categories of forklift training (Class-room & Practical),
International (IADC) – At the end of the training participants will receive certificates that is recognized globally.
Dates: 10th – 12th of May, 2023.
Fee: N300,000
National – At the end of the training participants will receive certificates that is recognized nation wide.
Dates: 24th – 26th of May, 2023.
Fee: N100,000
Is your company or organization looking for forklift training and certification for its staffs or are you an individual that seeks to get trained and certified in forklift operations, then Zota Oil and Gas Limited is the right place to come.
Forklift Operations Training and Certification Course
Zota Oil and Gas Nigeria Limited brings you practical Forklift Operations Training and Certification Course at her Lagos Office at 121, Bisi Obadina Street, Omole Phase 1, Ikeja, Lagos, Nigeria.
Course Overview
This course is for operators and supervisors of forklift operations. The course uses OSHA criteria from 29 CFR 1910.178.
Course instructors highlight the most common dangers of powered industrial truck operations and provide solutions to those dangers.
Driving tips, avoiding injury and proper handling & transportation of loads are featured. To be in compliance with OSHA 29 CFR 1910.178, only trained and authorized operators shall be permitted to operate a Forklift.
Participants receive manuals & hands-on practical exercise to facilitate training.
Course Objective:
Upon completion of this course participant should be able to:
- Carry out pre-use inspection of forklifts in compliance with manufacturers’ specifications and industry best practice.
- Demonstrate skills for proper fueling and battery charging techniques
- Identify types and characteristics of forklifts with different kinds of hazards associated with each one.
- Identify stability triangles for forklifts.
- Show confidence on knowledge gained applicable to Basic Driving Principles, Stability, and Load Handling.
Course Outline include but not limited to;
- Types of Forklift
- Operator’s Responsibilities
- Parts of the forklift
- Hydraulic system
- Stability
- Operating Procedures
- Refueling and Recharging
- Parking
- Selection of Forklift Operators
Duration of Training: 2 days
Training Date: 26th – 27th of August, 2021
Training Venue: This will be communicated 48 hours before the training
Training Fee: N75,000
For Enquiries Call or WhatsApp: +2348037236096
Email: info@zotaoilandgas.com
Payment details: Guaranty Trust Bank (GTB) – 0014215004
Feel free to ask your questions in the comments section. We will answer as soon as possible. Thank you.
Confined Space Entry Safety Course
Confined Space Training Course is designed to equip participants with knowledge and skills to safely enter and work in permit-required confined spaces, as defined by OSHA 29 CFR 1910.146 as well as carry out rescue operations.
Points that will be covered are:
- Journey Management
- Defensive Driving
- Vehicle Preventive Maintenance
Leadership Training
“Great leaders find innovative ways to unite and engage people, creating a workforce that’s ready for any challenge.” – Dale Carnegie
During our leadership training programme participants get to learn:
- Managing Safety At Work
- Management Responsibilities for Health and Safety
- Fraud Management
- Effective Leadership
Road Transport Safety
Road traffic safety refers to the methods and measures used to prevent road users from being killed or seriously injured. Typical road users include: pedestrians, cyclists, motorists, vehicle passengers and passengers of on-road public transport (mainly buses).
Training covers:
- Journey Management
- Defensive Driving
- Vehicle Preventive Maintenance
Supervisor Training
Supervisors are responsible for a great deal of what goes on day to day in the workplace; it’s not just a position that solely assigns tasks. Supervisors must ensure a safe and healthful workplace for employees. Employees must be able to report unsafe or unhealthful workplace conditions or hazards to a supervisor without fear of reprisal.
The Supervisors’ Safety Development Program (SSDP) trains supervisors and managers to incorporate best safety practices into their daily management activities.
What is learned:
- Fundamentals of Supervision
- Time versus Safety Management
- Unsafe Act/Condition Audit
- The Supervisor and Safety
HSE Training and Consulting
Zota is the nation’s leading specialist training provider in safety, survival and emergency response training for high risk industries.
Since 2009, Zota has built a solid reputation in providing safety training for the Oil & Gas industry through people, processes, products and attention to detail.
Zota’s national team of 100 staff, delivered over 40,000 trainee days of professional, engaging and safe training using simulated environments to develop skills and behaviours that address safety-critical industry needs.
Zota integrates four key elements into all training: Safety, compliance, cost effectiveness, and trainee engagement. By delivering training that meets all four of these elements, Zota ensures the best trainee experience and learning outcomes possible, whilst continuing an outstanding safety record and cost benefits for clients.
Zota is committed to helping ensure that these programs are successful in further improving safety culture.
HSE Training
We provide training according to specific needs of clients to meet identified competency gaps in Health and safety, the scope covers from managerial to supervisory and artisan levels.